Spiral Shank Nails Hot Dipped Galvanized 10d 3″/7.62cm – 1 Box 1.5kg/3.3lb
Spiral shank nails offer good holding power and are specifically designed for use with hardwoods and dense materials. Flooring,
siding, decking, pallets and truss rafters are typical applications for spiral shank nails.
Specification:
* Spiral Shank
* Hot Dipped Galvanized
* 10d 3″/7.62cm
* 1 Box 1.5kg/3.3lb

Features:
* Ideal for general construction, carpentry and framing
* Spiral shank for greater holding power, flat head, diamond point
* For use on exterior applications and with all treated lumber
* Galvanized to meet or exceed ASTM A 153 Class DUmbrella nails are specially designed for the installation of roofing materials. umbrella nails have a smooth or twisted shank and umbrella head, which prevent roofing sheets from tearing around the nail head, and have an artistic and decorative effect. umbrella nails are one of the most used nails and are characterised by their low cost and high performance. We use high quality Q195 and Q235 steel wire to ensure that the nails do not corrode in extreme weather.
These nails, with smooth or twist shanks and umbrella head, are the mostly used type of nails with less cost and good property. Umbrella head is designed for preventing the roofing sheets from tearing off around the head of the nail, as well as offering an artistic and decorative effect. The twist shanks and sharp points can hold wood and roofing tiles in position without slipping. We adopt Q195, Q235 carbon steel, 304/316 stainless steel, copper or aluminum as material, so as to ensure the nails resistant to extreme weather and corrosion. Besides,rubber or plastic washers are available to prevent water leaking.

length in.

10 Ga. 15/32-in Head

11Ga. 7/16-in Head

12 Ga. 3/8-in. Head

3/4

....

318

...

7/8

249

299

388

1

220

271

360

1+1/4

176

212

282

1+1/2

147

189

237

1+3/4

123

157

211

2

...

140

...