So which is the rivets or screws? What’s the difference between rivets and screws?
Which is fixed, the rivets or the screws?
A riveting nail is a spike-shaped object with a cap at one end: in riveting, the part being riveted is joined by its own deformation or interference. A fastener consisting of two parts, a head and a nail rod, used to fasten and connect two parts (or members) with a pass hole to make it a whole piece. This connection form is called rivet connection, referred to as riveting. Genus and cannot be separated. Since the two parts connected together need to be separated, it is necessary to damage the rivets on the parts.

The utility model relates to a metal rod-like part with a cap at one end. After penetrating the connected member, the outer end of the rod is hit and pressed out the other end, and the member is pressed and fixed. This is not absolutely good or bad, depending on the use of the occasion, the requirements for fastening. Rivets are mainly used in single-sided construction occasions, he has a wide range of riveting, rapid installation, with strong clamping force and shock resistance. Another point is that the fracture of the rivet is smooth, and the lock core is strong. If screws are used, the installation speed may be slightly slower, and the surface is difficult to smooth.

What’s the difference between rivets and screws?
1, the rivets are deformed by themselves, generally one end is larger, and two (or more than two) parts are connected together. Usually after riveting, if you want to split the parts, it is necessary to damage the rivet. When the rivets are selected, see whether the object is opened next time and whether it can be used twice, because the rivets are riveted for a while and can not be opened. The rivets are toothless and use the head of the rod to expand to prevent the object from sliding out.

2, the screw is threaded into the parts to connect the parts. So if you want to split the parts, you just need to screw out, and the screw will not be damaged and can be used repeatedly. Other screws can be disassembled, and it is best to use screws or screws on objects that can be used twice, and screws and screws are with teeth. Self-tapping screws are directly drilled into the object, screws and screws need to be used together with nuts.