The wire mesh is made of low-carbon steel wire, stainless steel wire and aluminum alloy wire mesh, which are crocheted by the wire mesh machine. Then the material selection should be carefully controlled. You can test the incoming raw materials, first the thickness of the wire diameter, then the toughness of the wire, etc. If the test is qualified, the product quality can be guaranteed.
Distinguish from the surface treatment process, such as galvanizing and plastic coating, you can use an iron bar to knock to see the crack condition, or see whether there are bubbles on the surface, so as to check whether the surface treatment process is qualified.
The reliability of this kind of anti-corrosion treatment is good: the zinc coating and the steel are metallurgically combined and become a part of the steel surface, so the durability of the coating is relatively reliable.
The cost of hot-dip galvanizing treatment for the fence of barbed wire netting is low: the cost of hot-dip galvanizing and rust prevention is lower than that of other paint coatings;
Durability of the checkered fence: in the suburban environment, the standard thickness of hot-dip galvanized anti-rust can be maintained for more than 50 years without repair; In urban or offshore areas, the standard hot-dip galvanized antirust coating can be maintained for 20 years without repair.
The toughness of the coating is strong: the galvanized coating forms a special metallurgical structure, which can withstand mechanical damage during transportation and use.
Comprehensive protection: every part of the plated part can be coated with zinc, and can be fully protected even at the depression, sharp corner and hidden place.
Hot galvanizing of guardrail net saves time and effort: the galvanizing process is faster than other coating methods, and can avoid the time required for painting on the site after installation.